RC Boat Water Pump 3-6V 370 Water Cooling Pump w/ JR Plug for RC Vehicles

RC Boat Water Pump 3-6V 370 Water Cooling Pump w/ JR Plug for RC Vehicles This pump will work off of the voltage supplied to your receiver. This is simply plugged directly into an open spot on your receiver. The JR style plug will work with most modern receivers on the market. Features: - At 5V, the pump will still operate normally after 15 hours of operation without interruption. - Low Noise: The low noise design gives you the perfect experience. - The 370 motor water pump is suitable for installation on a remote-controlled boats that requires water cooling for the water-cooled motor or ESC. The pumping voltage of the 370 motor is 3 to 6V, which can be directly plugged into the receiver for power. - Suitable for remotely controlled aircraft carriers, warships, battleships, and other vehicles that require water cooling for electric motors and ESCs. - Water pump working test: After actual testing, the water pump works continuously for 15 hours under the condition of 5V voltage, and the pump will work normally. The temperature will be hot, but it is in the normal range and will affect the use. Specifications: - Voltage from 3 to 6 volts - Voltage: 3 V Pumping flow: 1.1L / one minute Pumping flow: 300ml / one minute - Voltage: 6 V Pumping flow: 1.8L / one minute Pumping flow: 600ml / one minute - Pump & motor length: 60mm - Pump & motor length including the tubing fittings: 72mm - Diameter: 28mm - Wire length: 200mm - Weight: 72 grams Note: Works with OSE 7/32", 1/4", 9/32" and 8mm Tubing. Zip ties are recommended with all tubing, but required for use with 1/4" and 8mm tubing to tighten the tubing to the fittings.