Hot Racing 105mm Aluminum Heavy Duty Big Bore Shocks (2)

Hot Racing 105mm Aluminum Heavy Duty Big Bore Shocks (2) This is a pack of two Hot Racing 105mm Aluminum Heavy Duty Big Bore Shocks. These Hot Racing 105mm big bore threaded body aluminum shocks are for use with many Traxxas and other 1/10 scale off-road vehicles using 105mm length shocks. Features: CNC machined 6061-T6 billet aluminum shock bodies, collars, caps, and spring retainers "Big Bore" threaded shock bodies CNC machined 11mm Delrin pistons 3.5mm stainless steel shock shafts Gunmetal and blue anodized aluminum components Vented shock caps with bladder seals for consistent rebound dampening Threaded shock collars with o-rings to prevent unwanted movement Composite plastic lower shock ends with aluminum balls Fully assembled, just add shock oil and bleed Specifications: Extended length: 105mm Compressed length: 75mm Overall length: 115mm Diameter: 19mm Spring: ~5.8lb/in, 1.54mm wire, 14 turn dual rate, 19.3mm OD, 72mm long Includes: (2) assembled shocks (2) M3x20mm flat head cap screws (2) M3x18mm button head cap screws (2) 3mm countersunk washers (2) 5.9 hollow balls (4) 1.5mm thick spacers (4) 3mm thick spacers Requires: Silicone shock oil of modeler's choice and bleeding per the typical bladder shock bleeding procedure Best used with Team Associated shock Green Slime grease or shock o-ring grease when rebuilding lower seal Snap ring pliers when rebuilding lower seal NOTES: Use spacers as need for installation Can be used with optional Hot Racing springs: SLF63FS261 (progressive), SLF63MR268 (linear), SLF63RS286 (progressive) Accepts optional Hot Racing silicone shock boot RDP34201 Replacement parts are Hot Racing: RTD910BN (shock ends), RTD910RB (pistons and o-rings), RTD1010X (bladders and lower seals)